Copper bronze catalyzed Heck reaction in ionic liquids

Heck reaction of aryl iodides and activated aryl bromides catalyzed by copper bronze in tetrabutylammonium bromide as solvent and tetrabutylammonium acetate as base was developed. The effective catalysts are Cu nanoparticles deriving from the reaction of iodobenzene with copper bronze. These nanoparticles are very stable in tetraalkylammonium salts, are easily recycled, and can be stored for months without a loss of catalytic efficiency. [reaction: see text]     

Separation of biomolecules by μ-high-performance anion-exchange chromatography using a tentacle-like stationary phase

A variety of biomolecules and their variants, which have previously been problematic to separate, have been analysed using a novel anion-exchange resin based on a non-porous polystyrene polymeric support with a hydrophilic coating and grafted tentacular quaternary ammonium functional groups. The hydrophilic coating results in minimal interaction between the support and the biomolecule, while the highly flexible tentacular-like anion-exchange groups increase the ionic interaction potential and act as an umbrella to hold the proteins away from the surface. Because of the removal of silanophilic interactions, minimisation of hydrophobic interactions, and the highly flexible nature of the tentacle-like ion exchangers, ionic interactions can therefore dominate the separation. As such this phase is highly suited to the separation of highly charged biomolecules and their variants. This polymeric strong anion-exchange (SAX) support was packed into a fused-silica capillary column and, using a salt concentration gradient, various recombinant proteins were analysed by -HPLC resulting in baseline resolution.Awarded a poster prize on the occasion of the Euranalysis XIII conference, Salamanca, Spain, 5–10 September 2004     

Thermal behavior of orthorhombic polymorphs I and II of spironolactone

Investigation into the thermal behavior of orthorhombic Forms I and II of spironolactone, by means of differential scanning calorimetry and high-resolution X-ray powder diffraction, showed that Form I melts then recrystallizes into Form II at 373–393 K, i.e. in the temperature range within which high resolution X-ray powder diffration showed that Form I transforms into Form II. Refinements of the lattice parameters of the two forms indicated that Form I is denser than Form II in the range from 298 K up to the temperature at which it melts.     

Structural researches on the chelating behaviour of the biguanide ligand. The crystal structures of Co(C2H6N5)3 · 2H2O and Cu(C2H7N5)2CO3·4H20

Summary Crystals of the title compounds are both monoclinic, with unit cell dimensions:a = 9.293(5),b = 10.122(5),c = 16.737(7) Å. = 103.44(3)°,Z = 4, space groupP2₁/c for the cobalt derivative;a = 13.1ß5(7),b = 17.546(ß),c = 6.871(3) Å, = 107.01(4)°Z = 4, space groupP2₁/n for the copper derivative. The structures were solved from diffractometer data by the heavy-atom technique for the first compound and by direct methods for the second compound. Refinement by block diagonal least-squares gaveR = 5.9% for 3511 independent reflections andR = 8.8% for 2885 independent reflections for the cobalt and copper compound respectively. In both compounds the biguanide moiety behaves as a bidentate chelating ligand in a symmetrical tautomeric form, but it is deprotonated in the octahedral cobalt compound and neutral in the square planar copper compound.     

Fullerohelicates: a new class of fullerene-containing supermolecules

A multicomponent array made of a bis-copper(I) helicate core and two peripheral fullerene subunits has been prepared and electron transfer from the photoexcited Cu(I)-complexed unit to C60 occurs.     

Palladium-catalyzed reaction of aryl iodides with acetic anhydride. A carbon monoxide-free synthesis of acetophenones

[reaction: see text] The palladium-catalyzed reaction of aryl iodides with acetic anhydride provides a straightforward and experimentally simple carbon monoxide-free route to acetophenones. The reaction tolerates a wide range of functionalized aryl iodides. Acetophenones are isolated in excellent yield with a variety of neutral, slightly electron-rich, and slightly electron-poor aryl iodides, whereas moderate yields are obtained with aryl iodides containing strongly electron-withdrawing substituents.     

Uncharged water-soluble Co(II)-porphyrin: a receptor for aromatic alpha-amino acids

Changes in the UV-vis spectra and induced circular dichroism (ICD) signals observed, in correspondence with the porphyrin Soret region, for aqueous solutions of achiral 5,10,15,20-tetrakis{p-[omega-methoxy poly(oxy-ethylene)]phenyl}porphyrin cobalt (II) (Co-P) and aromatic alpha-L-amino acids (Trp and Phe) give direct evidence for the coordination between the Co-P and amino acids. Considering that Co-P, besides the Co atom (one-fixation-point system), does not contain in the molecule active ligand groups and that no ICD signals have been observed in the case of Co-P/Ala, it has been concluded that hydrophobic interactions or stacking interactions between the aromatic rings of the porphyrin and those of Trp or Phe, acting as further amino acid (AA) fixation points, can strongly reduce the mobility of the chiral guest, thus permitting the generation of ICD signals. The effects of changes of both pH (in the range 2-9) and amino acid structure on the ICD phenomenon have also been investigated. In particular, the following have been observed: (i) strong ICD signals for all of the Co-P/N-acetyl amino acid aqueous solutions at pH 7, (ii) an unexpected ICD band with a bisignate form for the Co-P/Ala solution at pH 9 after long aging, and (iii) an opposite ICD signal when alpha-D-Phe and alpha-D-Trp enantiomers have been used. The data reported in this paper show how the binding mechanism between receptor and AAs changes by modulating properly the pH or the molecular structures and indicate that in these aqueous solutions the coordination Co-N is not the fundamental mechanism giving rise to the formation of the complexes and that the binding can be driven by hydrophobic interactions. These occurrences, through the analysis of the spectroscopic response (and, in particular, the form of the ICD band), can allow the recognition of AAs.     

Modeling of overloaded gradient elution of nociceptin/orphanin FQ in reversed-phase liquid chromatography

The Reversed-phase (RP) gradient elution chromatography of nociceptin/orphanin FQ (N/OFQ), a neuropeptide with many biological effects, has been modeled under linear and non-linear conditions. In order to do this, the chromatographic behavior has been studied under both linear and nonliner conditions under isocratic mode at different mobile phase compositions--ranging from 16 to 19% (v/v) acetonitrile (ACN) in aqueous trifluoracetic acid (TFA) 0.1% (v/v)-on a C-8 column. Although the range of mobile phase compositions investigated was quite narrow, the retention factor of this relatively small polypeptide (N/OFQ is a heptadecapeptide) has been found to change by more than 400%. In these conditions, gradient operation resulted thus to be the optimum approach for non-linear elution. As the available amount of N/OFQ was extremely reduced (only a few milligrams), the adsorption isotherms of the peptide, at the different mobile phase compositions examined, have been measured through the so-called inverse method (IM) on a 5 cm long column. The adsorption data at different mobile phase compositions have been fitted to several models of adsorption. The dependence of the isotherm parameters on the mobile phase composition was modeled by using the linear solvent strength (LSS) model and a generalized Langmuir isotherm that includes the mobile phase composition dependence. The overloaded gradient separation of N/OFQ has been modeled by numerically solving the equilibrium-dispersive (ED) model of chromatography under a selected gradient elution mode, on the basis of the previously determined generalized Langmuir isotherm. The agreement between theoretical calculations and experimental overloaded band profiles appeared reasonably accurate.     

Structure‐Dependent Photoinduced Electron Transfer in Fullerodendrimers with Light‐Harvesting Oligophenylenevinylene Terminals

Oligophenylenevinylene (OPV)‐terminated phenylenevinylene dendrons G1 – G4 with one, two, four, and eight “side‐arms”, respectively, were prepared and attached to C₆₀ by a 1,3‐dipolar cycloaddition of azomethine ylides generated in situ from dendritic aldehydes and N‐methylglycine. The relative electronic absorption of the OPV moiety increases progressively along the fullerodendrimer family C₆₀G1 – C₆₀G4 , reaching a 99:1 ratio for C₆₀G4 (antenna effect). UV/Vis and near‐IR luminescence and transient absorption spectroscopy was used to elucidate photoinduced energy and electron transfer in C₆₀G1 – C₆₀G4 as a function of OPV moiety size and solvent polarity (toluene, dichloromethane, benzonitrile), taking into account the fact that the free‐energy change for electron transfer is the same along the series owing to the invariability of the donor–acceptor couple. Regardless of solvent, all the fullerodendrimers exhibit ultrafast OPV→C₆₀ singlet energy transfer. In CH₂Cl₂, the OPV→C₆₀ electron transfer from the lowest fullerene singlet level (¹C₆₀*) is slightly exergonic (ΔG_CS≈0.07 eV), but is observed, to an increasing extent, only in the largest systems C₆₀G2 – C₆₀G4 with lower activation barriers for electron transfer. This effect has been related to a decrease of the reorganization energy upon enlargement of the molecular architecture. Structural factors are also at the origin of an unprecedented OPV→C₆₀ electron transfer observed for C₆₀G3 and C₆₀G4 in apolar toluene, whereas in benzonitrile, electron transfer occurs in all cases. Monitoring of the lowest fullerene triplet state by sensitized singlet oxygen luminescence and transient absorption spectroscopy shows that this level is populated through intersystem crossing and is not involved in photoinduced electron transfer.